富士X100最新固件更新(1.2版),增添两大超实用功能!

By 2012年03月21日 二月 7th, 2013 摄影器材

富士X100-1.2固件更新

刚刚收到Kenzo的提醒,我的富士X100得以早早的更新了1.2固件。富士公司最近人品不错,频繁的公布富士X100相机的固件更新。而这次的新固件至少给我们带来了两大超实用新功能,这两个功能只是我在安装新固件后调试相机时摸索到的,不排除还隐藏着更多惊喜哦!欢迎各位多多交流,一起查漏补缺!

富士X100 1.2固件特点:

1、快门声和真实快门速度同步

数码相机的模拟快门声向来就是累赘,但这次不一样了!更新1.2固件后的X100在慢速快门时,会出现“咔——嚓”的快门声,真实的快门有多慢,“咔”与“嚓”之间的间隙就有多长!这是非常实用的改进——对于摄影老手来说,我们一般依据听到的快门声来简单判断快门速度是否足够快,足够“安全”。

2、RAW按钮自定义

对一些人而言,X100机背的RAW按钮是可有可无的,因为他们永远都在使用同一种格式拍摄照片。在1.2固件更新后,RAW按钮和FN按钮一样,可以自定义为自己常用的功能。我现在FN设为了最常用的“胶片模拟”功能,RAW设为白天经常要用到的“ND滤镜”,相信以后会方便很多。

此外,1.2版固件似乎还让对焦更加干脆快速了。这一点只是揣摩,并未严谨的测试,所以不作为已确定的新特点列出。

后记:富士公司官方公布的新固件特点如下:

1.Some functions, which can be set to “Fn” button and shown as “Fn BUTTON” in SET-UP menu, can be also set to RAW button. After pressing the command dial to right in the SET-UP menu of “Fn BUTTON”, “Fn” and “RAW” are displayed and each of selectable them, Also, by holding down RAW button for more than 3 seconds, same type of selection menu for RAW button is displayed, just as short-cut procedure.

2.By selecting in “ISO” menu in the shooting menu, either ISO sensitivity value or “ISO AUTO CONTROL” can be selected.

3.When AF MODE is set to “AREA” in Single AF (AF-S) mode, active focus point is zoomed in (magnified to approx 5x) by pressing center of the command control.

4.When “ND FILTER” is set to “Fn” button or “RAW” button, setting between ON (“ND” is displayed) or OFF (“ND” is NOT displayed) can be changeable by pressing “Fn” button or “RAW” button, which is set for “ND FILTER”.

5.When the image is shot with vertical angle of the camera and played back the shot in the LCD, the image is displayed with whole area of LCD even after pressing “playback zoom in” button.

6.When the human face is shot, the detected face is displayed during the playing back, and pressing the command dial to down, detected face is magnified during displaying.
7.AE control system and AF performance including AF speed has been improved for movie recording mode.

富士X100 1.2固件更新方法

1、如何查询X100现在的固件版本

(1)关机状态下,按住DISP按钮并开机,见到“升级”界面后松开DISP按钮;

(2)查看屏幕底部版本号,如低于1.20即可准备升级

2、如何给X100升级固件?

(1)充好电,至少三格;

(2)下载固件: 富士X100 1.2固件更新  [文件大小32.2MB]

(3)将文件存放到相机储存卡中;

(4)关机状态下,按住DISP按钮并开机,见到“升级”界面后松开DISP按钮;

(5)点机背OK按钮,不要关机,直到升级成功!

4 Comments

Leave a Reply

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据